Number of views:
FYL series corrosion-resistant submersible pump
Number of views:
Product serial number
Back to product list
The FYL submersible pump is a single-stage single-suction centrifugal liquid submersible working pump, which is used to transport 30 ~ 32% P2O5 of extracted phosphoric acid slurry, the temperature is 30 ~ 70 ℃， and the liquid-solid ratio is 4: 1 ~ 3: 1. For transportation of other corrosive media or suspensions.
（1） The pump has an advanced design and strong overall reliability. It adopts a rigid design with a thick pump shaft, large bearing capacity and reasonable rotor force to ensure continuous long-cycle operation of a single pump.
（2） The suction port of the FYL pump follows the axis direction, and the outlet is perpendicular to the axis. The suction port of the rotation direction of the pump rotates counterclockwise when viewed from the motor end.
（3） The pump is equipped with an axial adjustment device. When the abrasion or corrosion of the flow part occurs, the gap between the impeller and the casing can be adjusted by the adjustment device to maximize the recovery of the pump performance and extend the service life of the pump.
（4） Double bearing support, the distance between the two bearings is long.
（5） The shaft diameter is thick, the shaft has few steps, and the shaft has good rigidity.
（6） The support tube and bearing box are designed with good rigidity and the pump runs smoothly.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Address: No.2, Xinguang Road, Nissan Industrial Park, high tech Zone, Xiangyang City, Hubei Province
E-mail: [email protected]